KM Auto Detailing
The Geelong Car Owner’s Guide to Ceramic Coating

Protection

Ceramic Coating Geelong.

Molecular-bond protection from two of Australia's most respected coating brands. Applied by authorised installers to a consistent, documented standard.

Why it matters

One application. Years of protection. Applied by someone accountable for the result.

Ceramic coating bonds to your clear coat at a molecular level. It does not sit on top of it. The result is chemical resistance, hydrophobic water behaviour, and a gloss depth that wax cannot replicate. KM Auto Detailing is an authorised installer of both Wax is Dead and Black Armour: the only such studio in Geelong.

What ceramic coating actually does

Ceramic coating is a liquid polymer that, once cured, forms a semi-permanent bond with your vehicle's clear coat. Unlike wax or sealant, it does not sit as a layer on top of the paint. It integrates with the surface at a molecular level and cannot be removed by normal washing.

The coating creates a hard, hydrophobic shell that repels water, resists bird drop etching, reduces iron contamination bonding, and protects against UV oxidation. Day-to-day maintenance becomes significantly easier: contaminants bead and rinse away rather than bonding to the surface.

What ceramic coating does not do: it will not stop rock chips, it will not fill existing scratches, and it will not compensate for paint that has not been properly corrected first. If your paint has swirl marks, they will be locked in under the coating, which is why paint correction and a full decontamination wash are prerequisites for every ceramic coating job we do.

Any ceramic coating applied over imperfect paint is a permanent commitment to imperfect paint. We will not skip the preparation.

Visual Proof

The transformation.

Depth, gloss, and clarity that marketing cannot replicate.

Featured Vehicle: Mercedes-AMG E63 S

Mercedes-AMG E63 S before ceramic coating showing swirl marks and dull paint
Before
Mercedes-AMG E63 S after ceramic coating showing deep gloss and perfect clarity
After

Drag to compare

Is ceramic coating right for your vehicle?

Ceramic coating makes the most sense if:

  • You want protection that lasts years, not weeks
  • You keep your car detailed and want to reduce the effort required
  • You have a new car you want to protect before the first swirl mark appears
  • Your paint has been corrected and you want to preserve the result
  • You're tired of waxing every few months and watching it wear off
  • You've been offered paint protection by a dealer and want to understand the alternative

What you get

Chemical resistance

Bird droppings, insect acids, and road fallout are less likely to etch through a ceramic-coated surface. The window for cleaning is wider.

Hydrophobic water behaviour

Water beads and sheets off instead of sitting on the paint. Dirt and grime have less to bond to after rain.

UV protection

The coating acts as a barrier against UV oxidation: the process that dulls and fades paint over years of sun exposure.

Easier maintenance

Regular washing removes more contaminants with less effort. The surface stays cleaner between washes.

Depth and gloss

A properly applied ceramic coating enhances the depth and reflectivity of the paint beneath it, particularly visible on dark vehicles.

Authorised installer warranty

Wax is Dead and Black Armour coatings applied by authorised installers carry product warranty. Documentation is provided at handover.

How we apply it

Ceramic coating requires more preparation than the coating itself. The quality of the result depends entirely on the condition of the paint surface before the first drop is applied.

  1. 01

    Wash and decontamination

    Full foam wash, iron fallout decontamination, and clay bar treatment to strip all bonded surface contamination from the clear coat.

  2. 02

    Paint correction (if required)

    Any swirl marks, water etching, or fine scratches are corrected by machine polishing before the coating is applied. This stage is non-negotiable: coating over defects locks them in.

  3. 03

    Panel wipe

    Isopropyl alcohol wipe-down of all surfaces to remove polish oils and residue. The clear coat must be completely clean before coating.

  4. 04

    Coating application

    The ceramic coating is applied panel by panel in controlled conditions. Each panel is levelled and inspected before moving on.

  5. 05

    Cure and inspection

    The vehicle is held in controlled conditions during initial cure. A full inspection is completed before handover.

  6. 06

    Handover and documentation

    You receive care instructions, a record of the products applied, and warranty documentation where applicable.

Coating packages

Starting from $799.99

Ceramic Coating Protection (Standard)

Entry-level ceramic protection for vehicles in good paint condition.

  • Professional ceramic coating formula
  • Full wash and decontamination
  • Panel wipe and prep
  • Application to all painted exterior surfaces
  • Care instructions at handover

Starting from $999.99

approx. 7 hours

2-Year Ceramic Coating Protection

Entry-level ceramic protection for vehicles in good paint condition.

  • Professional 2-year ceramic coating formula
  • Full wash and decontamination
  • Panel wipe and prep
  • Application to all painted exterior surfaces
  • Care instructions at handover

Starting from $799.99

approx. 8 hours

5-Year Supreme Ceramic Coating Protection

Recommended

Mid-tier coating for drivers who want longer durability and deeper gloss.

  • Professional 5-year ceramic coating formula
  • Full wash, iron decon, and clay bar
  • Single-stage paint enhancement included
  • Application to all painted surfaces
  • Warranty documentation

Starting from $1,299.99

approx. 2 days

10-Year Ultimate Plus Ceramic Coating

Professional-grade ceramic protection for the long-term owner.

  • Professional 10-year ceramic coating formula
  • Full wash, iron decon, and clay bar
  • Single-stage paint enhancement included
  • Application to all painted surfaces, glass, and trim
  • Full warranty documentation
  • First maintenance wash included

Starting from $1,699.99

approx. 2 days

Paint correction is priced separately and assessed at drop-off. Most vehicles require at minimum a single-stage polish before coating.

Book a Free Inspection

Common questions

Free Resource

The Geelong Car Owner’s Guide to Ceramic Coating

7 questions to ask before you book, real 2026 Geelong pricing ranges, and why dealer paint protection is often a $2,000 trap, all free.

The result, not the marketing

Before and after paint correction and ceramic coating. Every vehicle in our portfolio was photographed in direct sunlight.

View Gallery

Ready to protect your vehicle properly?

Book online and select Ceramic Coating. We will confirm your booking and contact you if paint condition assessment changes anything about the preparation required.

Premium Certified Protection

We exclusively use the highest-grade ceramic systems available. Because your Geelong vehicle deserves a manufacturer-warrantied sacrificial layer that outlasts typical commercial products.

Wax is Dead Ceramic Coating Lineup
Ultimate Ceramic Coating Formulation
Ultra Ceramic Coating Application Bottle